Class 99 & 99K
Tucking (cont')
Draw a single thread from the fabric, or measure from the selvage to locate
the first tuck on the straight of the fabric grain.
●
For succeeding tucks, crease fabric or draw a thread at distance desired
from previous tuck.
●
Press tuck folds before stitching.●
To make "pin" tucks, insert the tuck fold in slot 1 and adjust lug A to locate
stitching a pin width from the fold.
●
To make 1/4" tucks, insert the tuck fold into slot 5, and move lug A to its
extreme left position.
●
Use a short stitch length and perfectly balanced tensions.
THE QUILTER
The Quilter, designed with a short,
open foot and an adjustable and
removable space guide, is especially
well adapted to stitching lightly padded
materials. The light padding is based to
the underside of the fabric and may be
of outing flannel, canton flannel, sheet
wadding or light wool interlining.
Replace the presser foot with the
Quilter. Adjust the space guide for the
width between stitching lines. The
space guide may be used to the right or
left of the needle.
Page 52
Table of Contents | Previous Page | Next Page
To Next Page
Loading...
Need help?
General
