Singer Heavy Duty 4452 User Manual

* The blindhem foot is an optional accessory not supplied
with this machine.
For hems, curtains, trousers, skirts, etc.
hem/lingerie for firm fabrics.
Turn the speed control to minimum!
Blind hem for stretch fabrics.
Blind
Set the machine as illustrated (1).
It takes practice to sew blind hems. Always make a
sewing test first.
Fold the fabric as illustrated with the wrong side uppermost (2).
Place the fabric under the foot. Turn the handwheel
forwards by hand until the needle swings fully to the left. It
should just pierce the fold of the fabric. If it does not, adjust
the stitch width accordingly (3).
Adjust the guide (4) by turning the knob (5) so that the
guide just rests against the fold.
Sew slowly, guiding the fabric carefully along the edge of
the guide.
It takes practice to sew
blind hems. Always make a sewing test first.
Note:
44
Blind hem/ Lingerie stitch
2 3
5
4
GB
1
0
1
2
3
4
5
0
1
2
3
4
5
0
1
2
3
4
M

Singer Heavy Duty 4452 Specifications

General

Built-In Stitches	32
Stitch Width	6mm
Stitch Length	4mm
Presser Foot Lifter	Extra high
Drop Feed	Yes
Needle Threader	Automatic
Bobbin Type	Class 15 transparent
Motor	60% stronger motor
Type	Mechanical
Frame	Metal
Presser Feet	All-Purpose Foot, Zipper Foot, Buttonhole Foot, Button Sewing Foot
Warranty	25-year limited
Sewing Speed	1100 stitches per minute
Buttonhole Styles	1-Step
Included Accessories	Needles, Seam Ripper/Lint Brush, Screwdriver, Spool Pin Felt, Auxiliary Spool Pin
Weight	14.6 lbs
Dimensions	15.5 x 6.25 x 12 inches