CDP-300 Installation Manual
Document Rev. 01.006 DOC0449 Page 8 of 31
Restricted Proprietary and Confidential Information
1 GENERAL
1.1 INTRODUCTION
This publication provides technical information for the installation of the CDP-300. The CDP-300 when used in
conjunction with the DVI-300 provides an interface to read and send email messages, receive and answer sat
phone calls, and display ISAT-200 parameters.
The CDP-300 along with the DVI-300 provides a rich interface for accessing the global voice and text
communications features of SKYTRAC System’s Iridium based ISAT-200. This combined interface is referred to
as the CDP/DVI.
If you are operating in CDP/DVI mode, refer to the DVI-300 Installation Manual (DOC0456) for details about
installation of the DVI-300.
1.2 CONTENTS
This manual contains procedures and other information for installing the CDP-300 system. It is divided into the
following sections:
Section 1 – General
This section contains a product overview and an overview of the contents of this manual.
Section 2 —
System Specifications
This section contains tables that list the power requirements and electrical specifications for the components of
the CDP-300.
Section 3 —
Mechanical Installation
This section contains the procedures for the physical installation of the CDP-300 system components.
Section 4 — Electrical Installation
The document reference is online, please check the correspondence between the online documentation and the printed version.
To Next Page
Loading...
Need help?
General