SkyTrac Systems Ltd.
Document Rev. 01.020 DOC0334 Page 24 of 49
Restricted Proprietary and Confidential Information
4 ELECTRICAL INSTALLATION
4.1 General
This section contains the information required to complete the electrical connections in an ISAT-200
system installation, including diagrams and tables that call out and list the contact locations of the
connectors used in the installation. This section also includes system wiring diagrams with
installation notes.
When installing the ISAT-200, the installer shall have a working knowledge of aircraft electronics
installation and be a holder of either an FAA Repairman’s Certificate or a Transport Canada
equivalent. All installations should meet the requirements of FAA advisory circular AC43.13-1B.
4.2 Line Functions
This section describes the contact layout of the ARINC404 ITRAY-200R for completion of electrical
installation purposes only. Included for the product is a drawing of the connector and a list of pin-
outs with a detailed description of each connector pin-out group.
IMPORTANT NOTICE:
All system interconnect cables must be connected before power is applied to the system.
The document reference is online, please check the correspondence between the online documentation and the printed version.
To Next Page
Loading...
Need help?
General
