SkyTrac Systems Ltd.
Document Rev. 01.020 DOC0334 Page 43 of 49
Restricted Proprietary and Confidential Information
10 ISAT-200 HUMAN MACHINE INTERFACE
10.1 General
This section provides a brief description of each of the ISAT-200 human machine interface
components. For more detailed information on each of these components, refer to the ISAT-200
User's Guide.
10.2 Display
The ISAT-200 includes an 8-character display for assistance during configuration and
troubleshooting.
10.3 LED
The LED on the ISAT-200 will indicate power and alert status. A steady green LED indicates the
ISAT-200 has power and is operating normally. An amber LED indicates an 'Alert' or error message
is waiting to be viewed on the display.
10.4 Button
The black button on the ISAT-200 is used for scrolling through the menu and accessing different
configuration options and error messages. A single push (press and release) of the button will scroll
through the menu one item at a time, while pressing and holding the button will select a menu item.
10.5 Ambient Light Sensor
Beside the display is an Ambient Light Sensor which will automatically detect the ambient light level.
10.6 USB Programming Port
The USB programming port is used for updating the ISAT-200 firmware directly from a computer
running Windows XP or later.
10.7 SD Card Slot
The SD Card slot is used for updating the ISAT-200 firmware when a computer is not available.
The document reference is online, please check the correspondence between the online documentation and the printed version.
To Next Page
Loading...
Need help?
General
