Safety Instructions
HEC002-A/HEC006-A 2-1
2 Safety Instructions
2.1 Before using the Thermo-con
This chapter is dedicated for your safety during interaction with the product.
The product is operated at high voltage.
Therefore, not only those who operate the unit, but those who are in charge of service and who work
nearby the product should read carefully and thoroughly understand descriptions related to safety in this
manual before starting the work.
2.1.1 Safety training
This manual is not a general manual for safety and hygiene education that safety and hygiene tutors are
supposed to conduct.
Anyone working with or near the product should be fully trained in recognition of the danger inherent to
the product and the related safety countermeasures.
A manager is responsible for strict compliance to the safety standard in whole system, but individual
person in charge of operation and maintenance should take responsibility for the daily work and should
consider the safety of the working location and environment.
Operators and maintenance personnel responsible should ensure the safety of workshops and their
environment before starting work.
Training concerning the product should take place after the sufficient training on safety. The training
must not be carried without consideration to safety.
2.1.2 Identification of “Danger”, “Warning”, “Caution” and “Note”
The notifications given in this operation manual aim to assure the safe and correct operation of the
product to prevent injury of operators or damage to the product. The notifications are grouped into four
categories, “Danger”, “Warning”, “Caution”, and “Note”, which indicate the severity of the hazard and
damage and also the degree of emergency. All notifications contain critical matter on safety, so they
shall be carefully observed.
DANGER, WARNING, CAUTION and NOTE signs are in order according to severity (DANGER>
WARNING> CAUTION> NOTE).
To Next Page
Loading...
Need help?
General
