-5-
No. ZK2-OM00201
■Safety Instructions
Do not disassemble, modify (including the replacement of board) or repair other than instructed
in this manual.
Otherwise, an injury or failure can result.
Do not operate the product outside of the specifications.
Do not use for flammable or harmful fluids.
Fire, malfunction, or damage to the product can result.
Please check the specifications before use.
Do not use in an atmosphere containing flammable or explosive gases.
Fire or an explosion can result.
The product is not designed to be explosion proof.
Do not use the product in a place where static electricity is a problem.
Otherwise failure or malfunction of the system can result.
Do not cut off the power and compressed air supplied to this product while it is operating.
Otherwise it can cause injury due to dropping of workpieces or damage to the system.
If using the product in an interlocking circuit
- Provide a double interlocking system, for example a mechanical system.
- Check the product for proper operation.
Otherwise malfunction can result, causing an accident.
The following instructions must be followed during maintenance
- Turn off the power supply
- Stop the air supply, exhaust the residual pressure in piping and verify that the air is released
before performing maintenance work.
It may cause an injury.
To Next Page
Loading...
Need help?
General
