How to start and terminate your work
The wait indicator
L extinguishes.
If required, you can adjust contrast and brightness on
the monitor so that all brightness and color levels of
the test image can be clearly distinguished (see en-
closed operating manual of the monitor).
Restart after emergency stop
Variant 1 - complete switch-off in case of an emergency stop
Conveyors, conveyor line* and X-ray generators are switched off immediately when an emergency stop but-
ton is pressed, the X-ray unit is then shut down and switched off as well.
After you have eliminated the safety risk reset the emergency stop button by turning or pulling (F 1-94)
and restart the unit as described above.
95587412 01/01/09 © Smiths Heimann
1-33
I
If the screen saver is activated and the
X-ray unit is not used for a certain time
(adjustable from 1 to 30 minutes), the
screen will be switched to dark. By
pressing any key the last image will ap-
pear again.
To Next Page
Loading...
Need help?
General
