EasyManuals Logo
Home>Snap-On>Power Tool>CTR714A

Snap-On CTR714A User Manual

Snap-On CTR714A
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
ZCTR714ACE Rev. E (08/19)
FCC Regulations
This device complies with Part 15, Subpart B of the
FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received,
including interference that may cause undesired
operation.
Risk of explosion or fire.
Do not throw away used batteries! Return your
battery to a Snap-on authorized repair center for
recycling. Explosion or flames can cause injury.
Risk of fire.
Do not attempt to disassemble the battery or remove
any component projecting from the battery terminals.
Prior to recycling, protect exposed terminals with
heavy insulating tape to prevent shorting. Fire can cause
injury.
Battery Charger Safety
Messages
Risk of electric shock and fire.
Do not insert battery pack into charger if case is cracked
or damaged. Electric shock and fire can cause injury.
To reduce the risk of electric shock, this power cord (for
USA version) has a polarized plug, (one blade is wider
than the other.) This plug will fit in on a polarized outlet
only one way. If the plug does not fit fully into the outlet,
reverse the plug; if it still does not fit, contact a qualified
electrician to install the proper outlet. Do not change
the plug in any way.
Use the CTC772A/CTCA772A/CTCEU772A/CTCJ772A
charger with the CTB8172BK/CTB8174 rechargeable
battery packs; Charging of any other types of batteries
may cause batteries to burst, causing injury and
damage.
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
Never attempt to connect two chargers together.
Do not expose charger to rain or snow.
Pull by plug rather than cord when disconnecting
charger.
Be sure the cord is not stepped on, tripped over,
damaged, or stressed.
Risk of explosion.
Wear safety goggles, user and bystander.
Explosion can cause eye injury.
Improper use of power tools and accessories can
cause broken tools. Before using charger, read all
instructions and cautionary markings on the
charger, battery, and product using battery. Broken
tools can cause injury.
Risk of electric shock and fire.
IMPORTANT SAFETY
INSTRUCTIONS
DANGER—TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, CAREFULLY FOLLOW THESE
INSTRUCTIONS.
1. This manual contains important safety and operating
instructions for the Snap-on CTC772A/CTCA772A/
CTCEU772A/CTCJ772A Charger.
2. Before using battery charger, read all instructions and
cautionary markings on battery charger, battery, and
product using battery.
3. CAUTION—To reduce risk of injury, charge only
CTB8172BK/CTB8174 type rechargeable batteries.
Other types of batteries may burst causing personal
injury and damage.
4. Do not expose charger to rain, moisture, or snow.
5. Use of an attachment not recommended or sold by the
battery charger manufacturer may result in a risk of
fire, electric shock, or injury to persons.
6. To reduce the risk of damage to cord, pull by the plug
rather than the cord when disconnecting the charger.
7. Make sure cord is located so that it will not be stepped
on, tripped over, or otherwise subjected to damage or
stress.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Snap-On CTR714A and is the answer not in the manual?

Snap-On CTR714A Specifications

General IconGeneral
BrandSnap-On
ModelCTR714A
CategoryPower Tool
LanguageEnglish

Related product manuals