Table of
contents
Operation
Search
MENU/Settings
Search
Index
45
GB
Flash
1 Lower the lens cover to switch to shooting mode.
2 (Flash) t desired mode
When the buttons are not displayed on the left side of the LCD
screen, touch .
• The flash strobes twice. The first flash adjusts the light quantity.
• While charging the flash, is displayed.
• You cannot use the flash during burst shooting.
• [On] or [Slow Synchro] is not available when the camera is in Intelligent Auto mode.
• In Sweep Panorama and Underwater Sweep Panorama (DSC-T110 only) modes, [Flash] is set to [Off].
(Auto) Flashes when shooting in low light or backlit conditions.
(On) Flash always operates.
(Slow
Synchro)
Flash always operates.
The shutter speed is slow in a dark place to clearly shoot the
background that is out of flash light.
(Off) Flash does not operate.
Notes
zWhen the “White circular spots” appears in flash
photos
This is caused by particles (dust, pollen, etc.) floating close to the lens. When they are
accentuated by the camera’s flash, they appear as white circular spots.
How can the “White circular spots” be reduced?
• Light the room and shoot the subject without a flash.
• Select (High Sensitivity) mode in Scene Selection. ([Flash] is set to [Off].)
Camera
Subject
Particles (dust, pollen, etc.)
in the air
To Next Page
Loading...
Need help?
General
