Table of
contents
Operation
Search
MENU/Settings
Search
Index
118
GB
Printing images directly using a
PictBridge compliant printer
Even if you do not have a computer, you can print images shot using the camera by connecting
the camera directly to a PictBridge compliant printer.
“PictBridge” is based on the CIPA standard. (CIPA: Camera & Imaging
Products Association)
• You cannot print movies.
Prepare the camera for USB connection to the printer, using the cable for multi-use terminal.
1 Insert the sufficiently charged battery pack into the camera.
2 Connect the camera to the printer.
3 Turn on the printer.
After the connection is made, the indicator appears on the screen.
If the indicator flashes on the screen of the camera (error
notification), check the connected printer.
• If it was impossible to connect to the printer, be sure to set [USB Connect] under (Main Settings) to
[PictBridge].
Note
Preparing the camera
Note
1 To the USB jack
2 To the multi
connector
Cable for multi-use terminal
indicator
To Next Page
Loading...
Need help?
General
