Getting started
24
Inserting a “Memory Stick Duo”
For details on the “Memory Stick Duo” (such
as write-protection), see page 126.
b Note
• You can use only a “Memory Stick Duo,” which is
about half the size of a standard “Memory Stick,” in
your camcorder (p. 126). Do not try to force any
other type of “Memory Stick” into the “Memory
Stick Duo” slot.
Insert the “Memory Stick Duo” with the b
mark at the bottom left corner until it
clicks.
To eject a “Memory Stick Duo”
Lightly push the “Memory Stick Duo” in once.
b Notes
• If you force the “Memory Stick Duo” into the
“Memory Stick Duo” slot in the wrong direction, the
“Memory Stick Duo” slot may be damaged.
• Do not insert anything other than a “Memory Stick
Duo” into the “Memory Stick Duo” slot. Doing so
may cause a malfunction of your camcorder.
• When the access lamp is lit or flashing, your
camcorder is reading/writing data from/to the
“Memory Stick Duo.” Do not shake or knock your
camcorder, turn the power off, eject the “Memory
Stick Duo,” or remove the battery pack. Otherwise,
image data may be damaged.
b mark
Access lamp
Lightly push in
once.
To Next Page
Loading...
Need help?
General