EasyManuals Logo
Home>Sony>Digital Camera>DSC-F828

Sony DSC-F828 User Manual

Sony DSC-F828
287 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #62 background imageLoading...
Page #62 background image
55
Advanced still image shooting
Shooting with shutter
speed priority mode
Mode dial: S
You can adjust the shutter speed manually.
If you shoot a moving subject at a higher
shutter speed, it appears as if frozen on the
image. At a lower shutter speed, the subject
appears as if it flowing.
Aperture value is automatically adjusted to
attain correct exposure according to the
brightness of the subject.
a Set the mode dial to S.
b Select a shutter speed with the
command dial.
The shutter speed can be selected from
1/2000 to 30 seconds.
If you select 1/25 second or slower
shutter speeds, the NR slow shutter
function is automatically activated. In
such cases, “NR” is indicated at the
left of shutter speed indicator.
c Shoot the image.
Shutter speeds of one second or longer are
indicated with ["] after the value, such as 1".
If the proper exposure is not obtained after
making the settings, the setting value indicators
on the screen flashes when the shutter button is
pressed halfway down. You can shoot in this
condition, but we recommend that you adjust
the flashing values again.
The flash is set to (Forced flash) or (No
flash).
When the shutter speed is high, the amount of
flash light may be insufficient even if you
strobes the flash.
You can adjust the exposure value (page 59).
High shutter speed Slow shutter speed
Mode dial
Command dial
Shutter button
8M
F2.0 0
EV
S
98
FINE
MAF
101
80
min
250
200
320
S
NR slow shutter
The NR slow shutter mode removes noise
from recorded images, providing clear
images. When using shutter speeds of 1/25
second or slower, the camera automatically
works the NR slow shutter mode and “NR”
is indicated next to the shutter speed
indicator.
Press the shutter
button fully down.
r
Then the screen
turns black.
r
Finally, when
“Processing”
disappears, the
image has been
recorded.
To eliminate the effects of vibration, use of
a tripod is recommended.
When a slow shutter speed is set, the
processing may take some time. This is
because the camera works to remove noise
during the time set by the shutter speed
setting.
F2.8
NR2''
Capturing
Processing

Table of Contents

Other manuals for Sony DSC-F828

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony DSC-F828 and is the answer not in the manual?

Sony DSC-F828 Specifications

General IconGeneral
BrandSony
ModelDSC-F828
CategoryDigital Camera
LanguageEnglish

Related product manuals