To add a Wi-Fi® sleep policy
1 From the Homescreen, tap .
2 Find and tap Settings > Wi-Fi.
3 Tap , then tap Advanced > Keep Wi-Fi on during sleep.
4 Select an option.
WPS
WPS (Wi-Fi® Protected Setup) is a computing standard that helps you establish
secure wireless network connections. If you have little background knowledge of
wireless security, WPS makes it easy for you to set up Wi-Fi Protected Access (WPA)
encryption to secure your network. You can also add new devices to an existing
network without entering long passwords.
Use one of these methods to enable WPS:
• Push button method – simply push a button on a WPS-supported device, for
example, a router.
• PIN method – your device creates a random PIN (Personal Identification Number),
which you enter on the WPS-supported device.
To Connect to a Wi-Fi® Network Using a WPS Button
1 From your Homescreen, tap
.
2 Find and tap Settings > Wi-Fi.
3 Turn on Wi-Fi® if it is not already on.
4 Tap
> Advanced > WPS Push Button, then press the WPS button on the
WPS-supported device.
To Connect to a Wi-Fi® Network Using a WPS PIN
1 From your Homescreen, tap
.
2 Find and tap Settings > Wi-Fi.
3 Turn on Wi-Fi® if it is not already on.
4 Tap
> Advanced > WPS PIN Entry.
5 On the WPS-supported device, enter the PIN that appears on your device.
Sharing your mobile data connection
You can share your mobile data connection with other devices in several ways:
• USB tethering
– share your mobile data connection with a single computer using a USB cable.
• Bluetooth® tethering
– share your mobile data connection with up to five other devices via Bluetooth®.
• Portable Wi-Fi® hotspot
– share your mobile data connection simultaneously with up to 8 other devices,
including devices that support WPS technology.
To Share Your Data Connection Using a USB Cable
1 Deactivate all USB cable connections to your device.
2 Using the USB cable that came with your device, connect your device to a
computer.
3 From your Homescreen, tap
.
4 Find and tap Settings > More > Tethering & portable hotspot.
5 Drag the slider beside USB tethering to the right, then tap OK if prompted. is
displayed in the status bar once you are connected.
6 To stop sharing your data connection, drag the slider beside USB tethering to
the left or disconnect the USB cable.
You cannot share your device's data connection and SD card over a USB cable at the same
time.
35
This is an Internet version of this publication. © Print only for private use.