31
DCR-HC90 2-548-307-11(1)
Recording/Playback
Searching for the starting point
Make sure that the CAMERA-TAPE lamp
lights up.
Searching for the last scene of the
most recent recording (END SEARCH)
[END SEARCH] will not work once you
eject the cassette after you have recorded
on the tape.
Touch
.
END SEARCH
EXECUTING
CANCEL
0: 00: 00160 min
Touch here
to cancel the
operation.
The last scene of the most recent
recording is played back for about 5
seconds, and the camcorder enters the
standby mode at the point where the last
recording has finished.
• [END SEARCH] will not work correctly
when there is a blank section between
recorded sections on the tape.
• You can also select [END SEARCH] from
the menu. When the PLAY/EDIT lamp
lights up, select the [END SEARCH] short-
cut in Personal Menu (p. 36).
Searching manually (EDIT
SEARCH)
You can search for the start point to start
the next recording while viewing the
pictures on the screen. The sound is not
played back during the search.
1 Touch .
2 Touch and hold (to go
backward)/ (to go forward)
and release it at the point where
you want the recording to start.
Reviewing the most recently
recorded scenes (Rec review)
You can view about 2 seconds of the scene
recorded just before you stopped the tape.
Touch
.
The last 2 seconds (approx.) of the most
recently recorded scene are played back.
Then, your camcorder is set to the standby.
To Next Page
Loading...
Need help?
General