Sony Handycam DCR-HC90 User Manual

78
DCR-HC90 2-548-307-11(1)
1 Turn on the computer.
Quit all applications running with an
i.LINK.
2 Prepare the power source for
your camcorder, then slide the
POWER switch down to turn on
the PLAY/ EDIT lamp.
Use the supplied AC Adaptor as the
power source since it takes a few hours
to create a DVD.
3 Insert a recorded cassette into
your camcorder.
4 Connect your camcorder to a
computer via an i.LINK cable
(optional) (p. 77).
• When you connect your camcorder to
a computer, make sure you insert the
connector in the correct direction. If you
insert the connector forcibly, it may be
damaged, and causes a malfunction of your
camcorder.
• For details, see “First Step Guide”.
5 Touch  [MENU] 
(EDIT/PLAY)  [BURN DVD] 
.
“Click to DVD” starts up and the
on-screen instructions appear on your
computer.
6 Place a writable DVD in the disc
drive of the computer.
7 Touch [EXEC] on the screen of
your camcorder.
BU RN DVD
START
0: 00 :00 :0 0
CR EATE DVD ?
EX EC CANCEL
60 min
The status of the operation on your
computer is displayed on the LCD
screen of your camcorder.
CAPTURING: The picture recorded
on the tape is being copied to the
computer.
CONVERTING: The picture is being
converted to the MPEG2 format.
WRITING: The picture is being written
onto the DVD.
• If you use a DVD-RW/+RW which has
other data stored on it, the message [This
is a recorded disc. Delete and overwrite?]
appears on the LCD screen of your
camcorder. When you touch [EXEC], the
existing data is erased and new data is
written.
8 Touch [NO] to finish creating a
DVD.
BURN DVD
COMP LETED
0:00 :00:00
C r e a t e a n o t h e r
c o p y ?
D i s c t r a y o p e n s .
YES NO
60 min
The disc tray comes out automatically.
To create another DVD with the same
content, touch [YES].
Creating a DVD (Direct Access to “Click to DVD”) (continued)

Sony Handycam DCR-HC90 Specifications

General

Brand	Sony
Model	Handycam DCR-HC90
Category	Camcorder
Language	English