Sony Handycam HDR-SR10 User Manual

16
Step 2: Charging the battery pack
You can charge the “InfoLITHIUM”
battery pack (H series) (p. 101) after
attaching it to your camcorder.
b Notes
• You cannot attach any “InfoLITHIUM” battery
pack other than the H series to your camcorder.
1 Connect the AC Adaptor to the
DC IN jack on the Handycam
Station.
Be sure that the v mark on the DC plug
is facing up.
2 Connect the power cord (mains
lead) to the AC Adaptor and the
wall outlet (wall socket).
3 Turn the POWER switch in the
direction of the arrow to OFF
(CHG) (the default setting).
4 Attach the battery pack by sliding
it in the direction of the arrow
until it clicks.
5 Insert the camcorder into the
Handycam Station securely, all
the way to the bottom.
The /CHG (charge) lamp lights up and
charging starts. When the /CHG
(charge) lamp turns off, the battery is
fully charged.
b Notes
• When inserting the camcorder into the
Handycam Station, close the DC IN jack cover.
4
3
1
2
5
5
POWER switch
DC IN jack
DC plug
AC Adaptor
Power cord (Mains lead)
To the wall outlet
(wall socket)
/CHG
(charge) lamp
Battery pack

Sony Handycam HDR-SR10 Specifications

Imaging and Video

imaging device	1/5" ClearVid™ CMOS sensor
pixel gross	2360K
video resolution	1920 x 1080

Storage and Recording

recording media	40GB Non-Removable Hard Disk Drive
memory stick compatibility	up to 8GB
recording times (high definition)	FH = 4 hours 50 min, HQ = 9 hours 40 min, SP = 11 hours 50 min, LP = 15 hours 10 min

Audio and Output

audio format	Dolby® Digital 5.1
analog audio/video output	Included (via A/V Remote Terminal)
digital audio/video output	Yes (via USB)

Display and Optics

lcd screen size	2.7"
optical zoom	15x
digital zoom	180x

Power and Battery

power consumption	4.5W (VF/LCD)
battery type	InfoLITHIUM® (NP-FH60)
power requirements	7.2V (battery pack); 8.4V (AC Adaptor)

Dimensions and Weight

weight with battery	560g
dimensions	81x76x129mm
measurements	3 1/4 x 3 x 5 1/8 inch