39
Recording/Playback
1 Play back the still image you want to
magnify.
2 Magnify the still image with T
(Telephoto).
The screen is framed.
3 Touch the screen at the point you want
to display in the center of the displayed
frame.
4 Adjust the magnification with W (Wide
angle)/T (Telephoto).
To cancel, touch .
Touch on the still image playback
screen.
The slide show begins from the selected
still image.
Touch to stop the slide show.
To restart, touch again.
b Notes
• You cannot operate playback zoom during slide
show.
z Tips
• You can also play back the slide show by
touching (OPTION) t tab t [SLIDE
SHOW] on the VISUAL INDEX screen.
• You can set continuous slide show playback by
selecting (OPTION) t tab t [SLIDE
SHOW SET]. The default setting is [ON]
(continuous playback).
Playing back a series of still
images (Slide show)
Playing the image on
a TV
Connection methods and quality of the
image (HD (high definition)/SD (standard
definition)) viewed on the TV screen differ
depending on what type of TV is connected,
and the connectors used.
Use the supplied AC Adaptor as the power
source (p. 16).
Refer also to the instruction manuals
supplied with the device to be connected.
b Notes
• When recording, set [X.V.COLOR] to [ON] to
play back on an x.v.Color-compliant TV (p. 68).
Some settings may need to be adjusted on the
TV when playing back. Refer to the instruction
manual of your TV for details.
You can connect your camcorder to the TV
easily following the instructions displayed
on the LCD screen, [TV CONNECT
Guide].
Operation flow
Switch the input on the TV to the
connected jack.
Refer to the instruction manuals of the
TV.
r
Connect your camcorder and TV
referring to [TV CONNECT Guide].
r
Make the required output settings
on your camcorder (p. 41).
To Next Page
Loading...
Need help?
Imaging and Video
