Sony HCD-SBT100 Service Manual

HCD-SBT100/SBT100B/SBT300W/SBT300WB
15
2-11. 2.4GHz ANTENNA (ANT1), HOLDER (ANTENNA) (HCD-SBT300W/SBT300WB)
5 screw
(BVTP3 u 8)
2 tape
(sub material)
4 2.4GHz antenna
(ANT1)
coating clip
7 holder
(antenna)
6 Rotate the claw of holder
(antenna) in the direction of
an arrow, align the hole of
panel (rear).
claw
:LUHVHWWLQJ
1 antenna connector
(CON2)
3 Remove the antenna
wire from the
coating clip.
tape
(sub material)
:LUHVHWWLQJ
Note:
Arrange the antenna wire so as not to overlap
with the screw hole of panel (rear).
antenna wire
antenna wire
NET board

Sony HCD-SBT100 Specifications

General

Brand	Sony
Model	HCD-SBT100
Category	Car Receiver
Language	English