Sony HDCU3500 User Manual

69
AUDIO/INTERCOM Menu
AUDIO/INTERCOM
Page name
Page No.
Item Set value Description
<MIC GAIN>
A01
CAM MIC GAIN Sets the camera microphone gain.
CH1 (---), 20, 30, 40, 50, 60
dB Set according to the microphone used.
(---): Displayed when a camera is not connected
(Display only).
CH2 (---), 20, 30, 40, 50, 60
dB
<AUDIO OUT>
A02
DELAY 0, 5, 11, 16, 21, 27, 32, 37, 43, 48,
53, 59, 64, 69, 75, 80 ms
Sets the camera microphone output phase.
AES/EBU OUT MIC1/2
, AES/EBU Selects the AES/EBU output.
MIC1/2: Outputs the camera MIC1/2 input from the
AES/EBU connector of the CCU.
AES/EBU: Outputs the camera AES/EBU input from
the AES/EBU connector of the CCU.
ANALOG OUT MIC1/2
, AES/EBU Selects the MIC OUT ANALOG output.
MIC1/2: Outputs the camera MIC1/2 input from the
AUDIO OUT connector of the CCU.
AES/EBU: Outputs the camera AES/EBU input from
the AUDIO OUT connector of the CCU.
CH1 : LEVEL –20, 0
, +4 dBu Sets the AUDIO CH1 output level.
CH1 : ADJUST –99 to 99, 0
CH2 : LEVEL –20, 0, +4 dBu Sets the AUDIO CH2 output level.
CH2 : ADJUST –99 to 99, 0
<INTERCOM>
A03
INTERCOM CH 1CH(PROD), 2CH(PROD&ENG) Selects the intercom channel number to be used.
PRODUCER
INTERFACE
CLEAR COM, 4WIRE
, RTS Sets the producer line intercom system.
SIDE TONE
CANCEL
–99 to 99 0
Sets the side tone cancel level. (Setting is possible
when CLEAR COM or RTS is selected)
TERMINATION OFF
, ON Sets termination resistance (200 ohms). (Setting is
possible when CLEAR COM or RTS is selected)
OFF: Displayed when 4WIRE is selected in
PRODUCER INTERFACE (Display only).
ENGINEER
INTERFACE
CLEAR COM, 4WIRE
, RTS Sets the engineer line intercom system.
SIDE TONE
CANCEL
0 to 99 0
Sets the side tone cancel level. (Setting is possible
when CLEAR COM or RTS is selected)
TERMINATION OFF
, ON Sets termination resistance (200 ohms). (Setting is
possible when CLEAR COM or RTS is selected)
OFF: Displayed when 4WIRE is selected in
ENGINEER INTERFACE (Display only).
PGM1 INPUT LEVEL –20, 0
, +4 dBu Sets the PGM1 input level.
PGM2 INPUT LEVEL –20, 0
, +4 dBu Sets the PGM2 input level.
PGM3 INPUT LEVEL –20, 0
, +4 dBu Sets the PGM3 input level.

Sony HDCU3500 Specifications

General

Brand	Sony
Model	HDCU3500
Category	Control Unit
Language	English