88
HKCU-FB50
TRUNK 12-pin (1)
LAN COM 8-pin (1)
NETWORK TRUNK 8-pin (1)
SDI I/O 1 to 4 3G/HD/SD SDI I/O
BNC type (4)
3G SDI: SMPTE ST424/425 Level-A/B,
0.8 Vp-p, 75 ohms, 2.970 Gbps/
2.967 Gbps
HD SDI: SMPTE ST292, 0.8 Vp-p,
75 ohms, 1.485 Gbps/1.4835 Gbps
SD SDI: SMPTE 259M, 0.8 Vp-p, 75 ohms,
270 Mbps
3G SDI/HD SDI/SD SDI, character signal
selectable
REFERENCE IN/OUT BNC type (2), loop-through output
HD: SMPTE ST274, tri-level sync signal,
0.6 Vp-p, 75 ohms
SD: Black burst (NTSC: 0.286 Vp-p,
75 ohms/PAL: 0.3 Vp-p, 75 ohms) or
NTSC 10F-BB
Input connectors
AC IN 100 V to 240 V AC (1)
SDI RET 1 to 4 BNC type (4)
3G SDI: SMPTE ST424/425, 2.970 Gbps/
2.967 Gbps
HD SDI: SMPTE ST292, 1.485 Gbps/
1.4835 Gbps
SD SDI: SMPTE 259M, 270 Mbps
PROMPTER 1
PROMPTER 2/
VBS-RET
BNC type (2), loop-through output during
1CH mode, terminated internally at
75 ohms during 2CH mode, analog signal,
1.0 Vp-p, 75 ohms
Output connectors
AUDIO OUT CH1,
CH2
XLR 3-pin, male (2), 0 dBu/–20 dBu/
+4 dBu
CHARACTER /
AES/EBU /
SYNC
BNC type (1), VBS, 1 Vp-p, 75 ohms
AES/EBU format
VBS and AES/EBU selectable
SDI OUT 1 to 4 3G/HD/SD SDI OUTPUT
BNC type (4)
3G SDI: SMPTE ST424/425 Level-A/B,
0.8 Vp-p, 75 ohms, 2.970 Gbps/
2.967 Gbps
HD SDI: SMPTE ST292, 0.8 Vp-p,
75 ohms, 1.485 Gbps/1.4835 Gbps
SD SDI: SMPTE 259M, 0.8 Vp-p, 75 ohms,
270 Mbps
3G SDI/HD SDI/SD SDI, character signal
selectable
UHD SDI A, B 12G/3G/HD SDI OUTPUT
BNC type (2)
12G SDI: SMPTE ST2082, 0.8 Vp-p,
75 ohms, 11.88 Gbps/11.868 Gbps
* 12G SDI can be selected by installing the
HZCU-UHD35.
3G SDI: SMPTE ST424/425 Level-A/B,
0.8 Vp-p, 75 ohms, 2.970 Gbps/
2.967 Gbps
HD SDI: SMPTE ST292, 0.8 Vp-p,
75 ohms, 1.485 Gbps/1.4835 Gbps
UHD SDI C, D 12G/3G/HD SDI I/O
BNC type (2)
12G SDI: SMPTE ST2082, 0.8 Vp-p,
75 ohms, 11.88 Gbps/11.868 Gbps
* 12G SDI can be selected by installing the
HZCU-UHD35.
3G SDI: SMPTE ST424/425 Level-A/B,
0.8 Vp-p, 75 ohms, 2.970 Gbps/
2.967 Gbps
HD SDI: SMPTE ST292, 0.8 Vp-p,
75 ohms, 1.485 Gbps/1.4835 Gbps
Supplied accessories
Number plates (1 set)
Before Using This Unit (1)
Operating Instructions (CD-ROM) (1)
Optional accessories
HKCU-SFP50 ST 2110 Interface Kit
HKCU-SM50 Single Mode Fiber Connector Kit
HKCU-FB50 UHB Transmission Board Kit
HZCU-CNFG50 Config Control Software
HZCU-SNMP50 SNMP Agent Software
HZCU-UHD35 4K/HDR Processor Software
United States and Canada: Power cord set (1-551-812-XX)
Other areas: Power cord set (1-782-929-XX)
United States and Canada: Plug holder B (2-990-242-01)
Other areas: Plug holder C (3-613-640-01)
CCA-5-3 Connection Cable (3 meters), CCA-5-10 Connection
Cable (10 meters)
RMM-301 Rack Mount Adaptor
Service Manual
Related devices
HDC3500 Color Camera
HDC3100 Fiber Color Camera
HDC2000 HD Color Camera
HDC2580/2500/2400/1700 HD Color Camera
RCP-3000/1000 series Remote Control Panel
MSU-1000 series Master Setup Unit
General
Power consumption 40 W
Operating
temperature
–10 °C to +40 °C (14 °F to 104 °F)
Storage temperature –20 °C to +60 °C (–4 °F to +140 °F)
Dimensions (w/h/d,
excluding protrusions)
310 × 112 × 39 mm
(12
1
/
4
× 4
1
/
2
× 1
9
/
16
inches)
Mass TX board: Approx. 0.6 kg (1 lb 5.2 oz)
Input/output connectors
Connectors BNC
Number of lines 4
Signal type SMPTE ST2082/ST2081/ST425/ST424/
ST292
Supplied accessories
UHB label (2)
Operating Instructions (1)
To Next Page
Loading...
Need help?
General
