74
FILE Menu
<OPTION>
M09
READ KEY FROM
USB
Execute using ENTER. Reads the installation key from the USB flash drive.
INSTALLED
OPTIONS
Lists the installed option software (Display only).
HARDWARE
OPTIONS
Lists the installed hardware options (Display only).
<MISC>
M10
OPTICAL SIGNAL
BACKUP
ENABLE, DISABLE
Sets whether to save the state of the OPTICAL
SIGNAL setting on the <CAMERA I/F> page of the
SYSTEM CONFIG menu for the next startup.
FILE
Page name
Page No.
Item Set value Description
<CCU FILE>
F01
FILE INDEX 1 to 5, 1
Selects the file number of the target for operation.
RECALL All menu settings of the unit can be saved to a CCU
file. Use RECALL to load and apply the saved
settings to simplify the setup operation.
The IP address, subnet mask, and default gateway
settings of the LAN COM connector are not loaded
using RECALL.
STORE Saves a CCU file to the internal memory.
Up to five CCU files can be saved in the unit. Select
the file number on the STORE screen.
EXPORT TO USB Exports a CCU file to the USB flash drive. Exporting
is also supported using the web menu.
The path for the USB flash drive is “/MSSONY/PRO/
CAMERA/HDCU5000”
IMPORT FROM USB Imports a CCU file from the USB flash drive.
Importing is also supported using the web menu.
The path for the USB flash drive is “/MSSONY/PRO/
CAMERA/HDCU5000”
FILE NAME1 to 5 NO_FILE Sets the CCU file name.
ASCII code, 1 to 32 characters
CLEAR ALL Deletes all CCU files.
<LOG>
F02
LOG ENABLE
, DISABLE Enables or disables saving of log files.
EXPORT TO USB Saves logs to the USB flash drive (Execute using
EXEC).
The path of the USB flash drive is “/MSSONY/PRO/
CAMERA/HDCU5000”
CLEAR Deletes logs stored internally on the unit (Execute
using EXEC).
Logs for up to 30 days are stored. Logs are deleted
when the 30-day maximum is reached, starting with
the oldest.
MAINTENANCE
Page name
Page No.
Item Set value Description
To Next Page
Loading...
Need help?
General
