Using the timer28
GB
B Using the timer
Waking up to the radio or
alarm
— Standby function
Waking up to the radio
You can wake up to your favorite radio program using the
standby function. You can preset different frequencies and
standby times to STANDBY MEMORY
and .
To wake up to the alarm, see “Waking up to the alarm”, page 30.
4
3, 5, 6
2
5
3
Make sure the clock is set correctly before using the standby
function (page 11).
The standby timer takes effect when the set time and the
displayed time match. You do not need to take into consideration
the LOCAL time and WORLD time. If you want to wake up at
8:00, set 8:00. After setting the standby time, simply select the
displayed time to LOCAL time or the time of the desired area
you want to use (WORLD time), and the standby function will
operate at 8:00 am for the specified area.
1 Tune in to the station you want to listen.
For tuning, see the various tuning methods (pages 16–27).
2 Adjust the volume using the VOLUME control.
3 Hold down ENTER and press STANDBY MEMORY
or .
When ENTER is held down, the PRESET
indicator will flash. Two short beeps sound
when STANDBY MEMORY or is
pressed and the selected station will be
stored to the standby memory button. The
standby memory number of “a” or “b” will
appear in the display.
4 Press POWER ON/OFF to turn off the radio.
Note
Always turn off the power when setting the standby time. The
time cannot be set when the radio is on.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
