Help Guide
Interchangeable Lens Digital Camera
ILME-FX3 Ver.2 or later
AE lock
When the contrast between the subject and background is high, such as when shooting a backlit subject or a subject
near a window, meter the light at a spot where the subject appears to have the appropriate brightness and lock the
exposure before shooting. To reduce the brightness of the subject, meter the light at a spot brighter than the subject and
lock the exposure of the entire screen. To make the subject brighter, meter the light at a spot darker than the subject and
lock the exposure of the entire screen.
Hint
If you select the [AEL hold] function in [
Custom Key/Dial Set.] or [ Custom Key/Dial Set.], you can lock the exposure as
long as you are holding down the button. You cannot set the [AEL hold] function to [Left Button], [Right Button] or [Down Button].
Note
[
AEL hold] and [ AEL toggle] are not available when using zoom functions other than optical zoom.
Related Topic
Assigning frequently used functions to buttons and dials (Custom Key/Dial Set.)
5-043-414-12(1) Copyright 2022 Sony Corporation
MENU →
(Setup) → [Operation Customize] → [ Custom Key/Dial Set.] or [ Custom Key/Dial Set.]
→ desired key, then assign [AEL toggle] to the key.
1
Adjust the focus on the spot at which the exposure is adjusted.
2
Press the button to which [AEL toggle] is assigned.
The exposure is locked, and
(AE lock) is displayed.
3
Focus on the subject again and press the shutter button.
To cancel the exposure lock, press the button to which the [AEL toggle] function is assigned.
4
To Next Page
Loading...
Need help?
General
