Help Guide
Interchangeable Lens Digital Camera
ILME-FX3 Ver.2 or later
Power Save Start Time
Sets time intervals to automatically switch to power save mode when you are not performing operations to prevent
wearing down the battery pack. To return to shooting mode, perform an operation such as pressing the shutter button
halfway down.
Menu item details
Off/30 Min/5 Min/2 Min/1 Min/10 Sec
Note
Turn off the product when you do not use it for a long time.
The power save function is deactivated in the following situations:
While power is being supplied via USB
While playing back slideshows
During FTP transfer
While recording movies
While connected to a computer or TV
While [IR Remote Ctrl] is set to [On]
When [Bluetooth Rmt Ctrl] is set to [On]
5-043-414-12(1) Copyright 2022 Sony Corporation
MENU →
(Setup) → [Power Setting Option] → [Power Save Start Time] → desired setting.
1
To Next Page
Loading...
Need help?
General
