Help Guide
Interchangeable Lens Digital Camera
ILME-FX3 Ver.2 or later
Area/Date/Time Setting
You can set the area (where you are using the camera), daylight savings ([On]/[Off]), the date display format, and the
date and time.
The Area/Date/Time setting screen will be displayed automatically if you did not register your smartphone in the initial
setup or when the internal rechargeable backup battery has fully discharged. Select this menu to set the date and time
after the first time.
Menu item details
Area Setting:
Sets the area where you are using the camera.
Daylight Savings:
Selects Daylight Savings [On] / [Off].
Date/Time:
Sets the date and time.
Date Format:
Selects the date display format.
Hint
To charge the internal rechargeable backup battery, insert a charged battery pack, and leave the product for 24 hours or more
with the power off.
If the clock resets every time the battery is charged, the internal rechargeable backup battery may be worn out. Consult your
service facility.
Related Topic
Performing initial setup for the camera
5-043-414-12(1) Copyright 2022 Sony Corporation
MENU →
(Setup) → [Area/Date] → [Area/Date/Time Setting] → desired setting.
1
To Next Page
Loading...
Need help?
General
