Sony NSX-24GT1 User Manual

Timer
Set the timer to turn the power on or off.
Press Fn + 1 and select [TV settings] - [Timer].
Return to Top
Eco
Press Fn + 1 and select [TV settings] - [Eco].
Return to Top
Console settings
Press Fn + 1 and select [TV settings] - [Console settings].
Return to Top
Add timer: Set a new timer to turn the power on. To modify
the timer setting, select the timer you want to
modify and change its settings. To delete a timer,
select [Delete this timer].
Sleep timer: Set the duration of time until the power is turned
off automatically.
Power saving: Set to [Picture off] to minimize the power
consumption. This setting is canceled when a key
is pressed, an application is launched, or a dialog
is displayed.
Quick start: Reduces the time required for startup, but power
consumption becomes higher.
Idle TV standby: Set the time at which the TV goes to standby
mode without any operations (e.g. remote control
interaction).
Auto shut-off: The TV turns off when no signal is detected for 15
minutes.
Light sensor: Optimizes the screen's brightness to suit the light
level of the room.
Front panel
illumination:
Lights up the Sony logo on the front of the TV.
Like 4
Copyright 2010 Sony Corporation
NSX-24GT1/NSX-32GT1/NSX-40GT1/NSX-46GT1
75

Sony NSX-24GT1 Specifications

Display Specs

aspect ratio	16:9
display resolution	1920 x 1080p
screen size	24 inches

Power

power requirements (voltage)	AC 120V
power requirements (frequency)	60Hz
power consumption (in operation)	84 W

Inputs and Outputs

hdmi connections input(s)	4 (2 Rear/ 2 Side)
usb 2.0	4 (Side)
ethernet connection(s)	10BASE-T/100BASE-TX/1000BASE-T (Rear)

Weight and Dimensions

dimensions without pedestal	571 x 353 x 71 mm
dimensions with pedestal	571 x 381 x 190 mm
weight without pedestal	8.7 kg
weight with pedestal	10.1 kg