7
Connector Panel
Chapter 2 Names and Functions of Parts
Connector Panel
A Input/output ports
There are four ports (A to D), where each port has the
following 16 connectors. The ports can be configured as
inputs or outputs using the web menu.
The input/output signal on the HD SDI IN/OUT
connectors varies with the port setting (input or output)
and the SDI signal format. For details, see “HD SDI
Connector Input/Output Specifications” (page 36).
For input ports
a HD SDI IN/OUT 1 to 4 connectors
Inputs HD SDI signals (up to four cables).
b HD SDI IN/OUT 5 to 8 connectors
Outputs the same signals input as connectors HD SDI IN/
OUT 1 to 4 for monitors (up to four cables).
c HD SDI IN/OUT 9 connector
Outputs an HD SDI signal with superimposed text
information for a monitor. To superimpose text
information, set [Character On/Off] to “On” on the Port
screen of the web menu.
When the input is a 4K signal, it outputs a down-converted
HD signal.
The audio signal is not output.
d HD SDI IN/OUT 10 connector
For ports A to C, this outputs the same signal as the HD
SDI IN/OUT 9 connector. When “HD Multi” (dual-system
input) is configured in the port settings, the x-1 (main port)
monitor signal is output from the HD SDI IN/OUT 9
connector and the x-2 (sub port) monitor signal is output
from the HD SDI IN/OUT 10 connector.
For port D, this outputs one of the following video signals
according to the web menu settings. To output the same
signal as the HD SDI IN/OUT 9 connector, set [Board D
SDI-10 Output] to [Off] on the [Setup] tab of the [System]
screen in the web menu.
• Port A to D signals are output in multi-monitor format
• Same signal output as the HD SDI IN/OUT 9 connector
e TIME CODE IN connector
Inputs a time code generated by an external device.
AInput/output ports (see page 7)
BRemote input/output
section (see page 8)
CPower supply section
(see page 9)
Port A
Port B
Port C
Port D
Note
1234
56789
10 IN OUT 1/2 3/4 5/6 7/8
HD SDI
MONITOR
TIME CODE AUDIO (AES/EBU)
IN/OUT
IN/OUT
To Next Page
Loading...
Need help?
General
