Connecting with a paired BLUETOOTH device
Connecting the speaker with an NFC-compatible device by One-touch (NFC)
By touching the speaker with an NFC-compatible device such as a smartphone or Walkman,etc.,
the speaker is turned on automatically and then proceeds to pairing and making a BLUETOOTH
connection. For details, refer to the following topics.
Connecting with an NFC-compatible device by One-touch (NFC)
Disconnecting the NFC-compatible device by One-touch (NFC)
Switching devices by One-touch (NFC)
Compatible smartphones
NFC-compatible smartphones with Android™ 4.1 or later installed
Compatible Walkman models
NFC-compatible Walkman models*
*
Even if your Walkman is compatible with the NFC function, it may not be able to make a
BLUETOOTH connection with the speaker by one touch. For details on the compatible models,
refer to the operating instructions supplied with the Walkman.
NFC
NFC (Near Field Communication) is a technology enabling short-range wireless communication
between various devices, such as smartphones and IC tags.
Thanks to the NFC function, data communication - for example, BLUETOOTH pairing - can be
achieved easily by simply touching NFC-compatible devices together (i.e., at the N-mark symbol
or location designated on each device).
Note
Once the BLUETOOTH devices are paired, there is no need to pair them again, except in the
following cases:
o Pairing information has been deleted after repair, etc.
o The speaker is already paired with 8 devices and another device is to be paired.
The speaker can be paired with up to 8 devices. If a new device is paired after 8 devices
have already been paired, the paired device with the oldest connection time is replaced
by the new one.
o The pairing information of the speaker has been deleted from the BLUETOOTH device.
o The speaker is initialized.
All pairing information will be deleted.
The speaker can be paired with multiple devices, but can only play music from one paired device
at a time.
Pairing and connecting with a BLUETOOTH device