Sony SRS-XB10 User Manual

o The pairing information with the speaker has been deleted from the BLUETOOTH device.
o The speaker is initialized.
All pairing information will be deleted. If you initialize the speaker, it may not be able to
connect your iPhone/iPod touch or computer. In this case, erase the pairing information
of the speaker on your iPhone/iPod touch or computer, and then perform the pairing
procedure again.
 The speaker can be paired with multiple devices, but can only play music from one paired device
at a time.
 The passkey of the speaker is “0000.” If a passkey besides “0000” is set on the BLUETOOTH
device, pairing cannot be done with the speaker.
Unable to turn on the speaker or charge the built-in battery
 Charge the built-in battery.
 Make sure the micro-USB cable is firmly connected to the speaker and booted computer.
 When using a USB AC adaptor (not supplied), make sure the micro-USB cable is firmly connected
to the speaker and the USB AC adaptor. In addition, make sure the USB AC adaptor is firmly
connected to an AC outlet.
 When using a USB AC adaptor (not supplied), make sure the USB AC adaptor has the ability to
output in 500 mA or more. Charging from a USB AC adaptor which has the ability to output in
less than 500 mA is not guaranteed.
The power suddenly turns off
 The battery may be running low. Charge the speaker by connecting the speaker to a booted
computer or an AC outlet via a USB AC adaptor (not supplied).
No sound/Sound from only one speaker/Low sound
level/Distorted sound/Humming or noise in the speaker
output/No voice or low voice from callers
 Check that both the speaker and the connected device are turned on.
 Turn up the volume of the speaker and the connected device.
 Check that the connected device is playing.
 Make sure the audio cable is firmly connected to the AUDIO IN jack during playback in AUDIO IN
mode.
 If you are connecting a computer to the speaker, make sure the audio output setting of the
computer is set for a BLUETOOTH device.
 Check that the speaker has established BLUETOOTH connection with the BLUETOOTH device.
 Pair the speaker and the BLUETOOTH device again.
 If the connected device has an equalizer function, set it to off.
 Keep the speaker away from a microwave oven, Wi-Fi, etc.
 Bring the speaker and the BLUETOOTH device closer together. Remove any obstacles between
the speaker and the BLUETOOTH device.

Sony SRS-XB10 Specifications

General

Driver diameter	46 mm
Number of speakers	1
Audio output channels	- channels
RMS rated power	- W
Wi-Fi	No
Frequency range	2.4 - 2.48 GHz
Bluetooth version	4.2
USB charging port	Yes
Bluetooth profiles	A2DP, AVRCP, HFP, HSP
Connectivity technology	Wired & Wireless
Product type	Mono portable speaker
Product color	Green
Product design	Tube
Volume control	Digital
International Protection (IP) code	IP5X
Recommended usage	Universal
Battery type	Built-in
Power source type	Battery
Battery life (max)	16 h

Weight and Dimensions

Width	75 mm
Height	91 mm
Weight	260 g