EasyManuals Logo

Sony SRS-XB10 User Manual

Sony SRS-XB10
25 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
If the CHG (charge) indicator is flashing in orange, turn off the speaker and charge the battery
sufficiently.
The device with a built-in radio or tuner cannot be connected to the speaker via BLUETOOTH
since noise may occur in broadcasts.
Locate the speaker farther away from a TV, radio or tuner, etc. since noise may occur in
broadcasts.
When using the Speaker Add function, if any other BLUETOOTH device(s) such as a BLUETOOTH
mouse or BLUETOOTH keyboard is connected to the BLUETOOTH device, terminate the
connection between them.
When listening to music, select an A2DP BLUETOOTH connection by operating the BLUETOOTH
device.
When receiving/making a phone call, select an HFP or HSP BLUETOOTH connection by operating
the BLUETOOTH device.
When receiving/making a phone call, check that output of the BLUETOOTH device is set for the
speaker.
Sound becomes low while in use
The sound may become low in the following cases. This is not a malfunction.
o When the battery is running low and the CHG (charge) indicator flashes in orange while
the speaker is being powered by the built-in battery only.
o When the battery is running low as a result of using the speaker at a loud volume for a
long time even if the speaker is connected to a booted computer or AC outlet via a USB
AC adaptor (not supplied).
If the sound becomes low while in use, follow the procedure below.
1. Turn off the speaker.
2. Charge the battery sufficiently.
Unable to pair the speaker with a BLUETOOTH device
Bring the speaker and the BLUETOOTH device to within 1 m (3 ft) of each other.
If the (BLUETOOTH) indicator is not flashing quickly in white, press and hold the (power)
PAIRING button until you hear beeps and the (BLUETOOTH) indicator begins to flash
quickly in white.
Connect the speaker to a booted computer or AC outlet via a USB AC adaptor (not supplied).
Otherwise, charge the battery of the speaker sufficiently.
Once the speaker is initialized, an iPhone/iPad/iPod touch may not be able to connect to the
speaker. In this case, delete pairing information on the iPhone/iPad/iPod touch then pair them
again.
Unable to connect the speaker to a BLUETOOTH device
with One-touch connection (NFC)

Other manuals for Sony SRS-XB10

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony SRS-XB10 and is the answer not in the manual?

Sony SRS-XB10 Specifications

General IconGeneral
Driver diameter46 mm
Number of speakers1
Audio output channels- channels
RMS rated power- W
Wi-FiNo
Frequency range2.4 - 2.48 GHz
Bluetooth version4.2
USB charging portYes
Bluetooth profilesA2DP, AVRCP, HFP, HSP
Connectivity technologyWired & Wireless
Product typeMono portable speaker
Product colorGreen
Product designTube
Volume controlDigital
International Protection (IP) codeIP5X
Recommended usageUniversal
Battery typeBuilt-in
Power source typeBattery
Battery life (max)16 h
Weight and Dimensions IconWeight and Dimensions
Width75 mm
Height91 mm
Weight260 g

Related product manuals