Sony STR-DG810 User Manual

• CNT SPK (Center speaker)
• NO
If you have not connected a center speaker,
select "NO". The sound of the center
channel will be output from the front
speakers.
• SMALL
If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select "SMALL" to activate
the bass redirection circuitry and output the
center channel bass frequencies from the
front speakers (if set to "LARGE") or sub
woofer.
• LARGE
If you connect a large speaker that will
effectively reproduce bass frequencies,
select "LARGE". Normally, select
"LARGE". However, if the front speakers
are set to "SMALL", you cannot set the
center speaker to "LARGE".
• SUR SPK (Surround speakers)
Tile surround back speaker will be set to tile
same setting.
• NO
If you have not connected surround
speakers, select "NO".
• SMALL
If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select "SMALL" to activate
the bass redirection circuitry and output the
surround channel bass frequencies from the
sub woofer or other speaker that is set to
"LARGE".
• LARGE
If you connect large speakers that will
effectively reproduce bass frequencies,
select "LARGE". Normally, select
"LARGE". However, if the front speakers
are set to "SMALL", you cannot set the
surround speakers to "LARGE".
• SB SPK (Surround back
speaker)
When the surround speakers are set to "NO",
the surround back speaker is also
automatically set to "NO" and the setting
cannot be changed.
• NO
If you have not connected a surround back
speaker, select "NO".
• YES
If you connect a surround back speaker,
select "YES".
Tip
The "LAR(-;E" :rod "SMALL" settings for each
speaker determine whether the internal sound
processor will cut the bass signal from that channeh
When the bass is cut Dora a channel, the bass
redirection circuitry sends the corresponding bass
lhequencies to the sub woofer or other "LARGE"
speakers.
However. since bass souuds have a certaiu amount
of directionality, it is best not to cut them. if
possible. Therefore. even when using small
speakers, you can set them to "LARGE" if you want
to output the bass frequencies from that speaker. On
the other hand. if you are using a large speaker, but
prefer not to have bass Dequencies output from that
speaker, set it to "SMALL".
If the overall sound level is lower than you prefer.
set all speakers to "LARGE". If there is not enough
bass. you can use the equalizer to boost the bass
levels. For details, see page 40.
• FL DIST. (Front left speaker
distance)
• FR DIST. (Front right speaker
distance)
Lets you set the distance from your listening
position to the front speakers (l_). If both
front speakers are not placed an equal distance
from your listening position, set the distance to
the closest speaker.
3
O
ID
continued_
49us

Sony STR-DG810 Specifications

Audio Specifications

impedance	8 Ohm
channel power rating	110 Watts X 6 (8 Ohms, THD 1.0%)
sound fields	Cinema - 3; Music - 3; Auto Format Decoding - 11; 2 Channel - 1

Power

power requirements	AC 120V, 60 Hz
power consumption (in operation)	TBD
power consumption (in standby)	TBD

Inputs and Outputs

composite video input(s)	4 (1 Front, 3 Rear)
composite video output(s)	1 (Rear)
optical audio input(s)	2 (Rear)
optical audio output(s)	1 (Rear)
coaxial audio digital input(s)	1 (Rear)
RCA audio input(s)	7 (3 Dedicated, 4 Audio/Video)
RCA audio output(s)	2 (1 A/V Output, 1 Output)
subwoofer output(s)	1 (Rear)
antenna terminal (AM loop)	1 (Rear)
antenna terminal (FM 75 Ohm)	1 (Rear)
headphone output(s)	Yes (Front- Silver)
HD component video input(s)	3 (Rear)
HD component video output(s)	1 (Rear)
HDMI™ connection input(s)	3 (Rear)
HDMI™ connection output(s)	1 (Rear)

Weight and Dimensions

weight	Approx. 17 Lbs. 3 oz. (8Kg)
measurements	Approx. 17" x 6-1/5" x 12-3/8" (430x157.5x310mm)