Sony STR-DN1000 User Manual

111
US
Other Operations
Using the Sleep Timer
You can set the receiver to turn off
automatically at a specified time.
Press SLEEP repeatedly while the
power is on.
Each time you press the button, the display
changes cyclically as follows:
0:30:00 t 1:00:00 t 1:30:00 t 2:00:00
t OFF
When Sleep Timer is activated, “SLEEP”
lights up in the display.
Tip
To check the remaining time before the receiver
turns off, press SLEEP. The remaining time appears
on the display. If you press SLEEP again, the Sleep
Timer will be canceled.
Changing the brightness
of the front panel display
(DIMMER)
You can change the brightness of the front
panel display.
1 Press AMP.
2 Press MENU.
3 Press V/v repeatedly to select
“SYSTEM”, then press or b.
4 Press V/v repeatedly to select
“DIMMER”, then press or b.
5 Press V/v repeatedly to select
the setting you want, then
press .
The front panel display will change the
brightness according to the setting you
have selected.
Tip
You can also press DIMMER repeatedly on the
receiver to change the brightness of the front panel
display.

Sony STR-DN1000 Specifications

General

Output power	200 W
Sound enhancement	Yes
Remote control type	RM-AAP042
Product color	Black
Audio output channels	7.1 channels
I/O ports	4x in, 1x out HDMI 1x coax. in