Sony Trinitron KV-35S26 User Manual

HME: connecting and Installing the TV (continued)
Conne cting a DBS (Direct Broadcast - Disconnect all power ge csi oe any connection.
. . For the highest picture quality, S VIDEO
1 Connect the cable from your satellite antenna your DBS manual for more information. rey
to your DBS receiver.
2 Attach the coaxial connector from your cable or
DBS receiver
antenna to VHF/UHF on your TV. 1 SATELLITE W
3 Using AUDIO/VIDEO connectors, connect 1 O] avon woot vr swp [O
AUDIO and VIDEO OUT on your DBS receiver Satellite | ucor| OOO e
to AUDIO and VIDEO IN on your TV. cable AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)
Connecting a DBS (Direct Broadcast
Satellite) receiver and a VCR 3 VMC-810S/820S (not supplied)
1 Connect the cable from your satellite antenna
to your DBS receiver.
2 Attach the-coaxial connector from your cable or
antenna to VHF/UHF-IN on your VCR. 1 | 4 MC 8103/8205; (nòt supplied) (Rear of TV)
3 Using a coaxial connector, connect VHF/UHF-
OUT on your VCR to VHF/UHF on your TV.
4 Using AUDIO/VIDEO connectors, connect
AUDIO and VIDEO OUT on your DBS receiver to
AUDIO and VIDEO IN on your VCR.
5 Using AUDIO/VIDEO connectors, connect
AUDIO and VIDEO OUT on your VCR to
VIDEO (yellow)
AUDIO and VIDEO IN on your TV. AUDIO Yahite)
AUDIO-R (red)
DBS receiver
Note:
e To view input from the DBS or VCR, select VIDEO 1
by pressing TV/VIDEO on the remote control. 5 VMC-810S/820S (not supplied)

Sony Trinitron KV-35S26 Specifications

General

Brand	Sony
Model	Trinitron KV-35S26
Category	TV
Language	English