Sony Trinitron KV-35S26 - Using the AUDIO Meru

BME Adjusting your SET UP (menus) (continued)
2 Using the AUDIO menu
SPEAKER : OFF
AUDIO OUT : VARIABLE
MENU
Use 0@ G) Exit
For detailed information on using the remote
to modify menu settings, refer to “Learning
menu selection” on page 18.
To select the AUDIO ) menu:
Display =
ee
To rest@> the factory settings
Press RESET on the remote control while the
AUDIO menu is displayed.
Tip ¢
Press (J) for direct selection of an EFFECT setting.
20
Adjust slider left (cursor down) to decrease higher pitched sounds.
Adjust slider right (cursor up) to increase higher pitched sounds.
TREBLE
Sound Adjustment
BASS Adjust slider left (cursor down) to decrease low pitched sounds.
Sound
Adjustment
Adjust
slider
right
(cursor
up)
to
increase
low
pitched
sounds.
BALANCE Adjust slider left (cursor down) to emphasize left speaker volume.
Sound Adjustment Adjust slider right (cursor up) to emphasize right speaker volume.
EFFECT
SURROUND:
Simulates
theater
quality
sound
(only
for
stereo
programs).
(KV-27S26,
27836,
Customize
sound
29RS26,
29RS26C,
32826,
32836,
32TW26,
34RS26C,
35826, 35836,
37RS26
only)
effect
based
on
the
SRS:
Produces
a
dynamic
three
dimensional
sound
for
stereo
or
encoded
audio
program's
audio
type.
signals.
(KV-27V26,
27V36,
29V36C,
29V66M,
29V76M,
32V26,
32V36,
34V36C,
35V36,
35V76,
37V36M
only)
SIMULATED: Adds a surround-lke effect to mono programs. (KV-27V26, 27V36,
29V36C, 29V66M, 29V7EM, 32V26, 32V36, 34V36C, 35V36, 35V76, 37V36M only)
MTS
Enjoy stereo,
bilingual and mono
programs.
STEREO: Select for stereo reception when viewing a program broadcast in stereo.
SAP: Select to listen to bilingual broadcast. (non-SAP programs will be muted
when this feature is selected)
MONO: Select for mono reception. (use to reduce noise during stereo broadcasts)
Quick MTS access: Press MTS on your remote to cycle through the MTS options
as follows: (STEREO » SAP +» MONO » STEREO)
SPEAKER
Custom selection of
audio output source.
ON: Select to listen to the sound from the TV speakers and a separate stereo system.
OFF: Select to turn off the TV speakers and listen to the TV's sound only through
external audio system speakers.
AUDIO OUT
Easy control of
volume adjustments.
AUDIO OUT can only be set when speakers are set to OFF.
VARIABLE: Sound output varies according to the TV settings. Volume, Bass,
Treble, and Balance are adjusted through the TV. Useful when you want to use
your remote to control the output of a separate audio system.
FIXED: Sound output is held at a fixed level. Volume, Bass, Treble, and Balance are fixed
to the factory settings. Volume adjustments are made through your stereo.