Help Guide
Wireless Noise Canceling Stereo Headset
WF-1000XM4
Pairing cannot be done.
Bring the headset and the Bluetooth device within 1 m (3 feet) from each other.
When pairing for the first time after purchasing, initializing, or repairing the headset, the headset enters pairing mode
automatically if you remove the headset from the charging case. When you pair a second or subsequent device, put
the headset units into both ears, then hold your fingers to the touch sensors on both the left and right units at the
same time for about 5 seconds to enter pairing mode.
When pairing a device once again after initializing or repairing the headset, you may be unable to pair the device if it
retains pairing information for the headset (iPhone or other device). In this case, delete the pairing information for the
headset from the device and pair them again.
Restart the connected device such as a smartphone or a computer you use, and pair the headset and the device
again.
Reset the headset.
Initialize the headset, and pair the headset and the device again.
Related Topic
How to make a wireless connection to Bluetooth devices
Resetting the headset
Initializing the headset to restore factory settings
5-027-983-11(1)
Copyright 2021 Sony Corporation
To Next Page
Loading...
Need help?
General
Weight and Dimensions
