Help Guide
Wireless Noise Canceling Stereo Headset
WF-1000XM4
Making a call
You can enjoy a hands-free call with a smartphone or mobile phone that supports the Bluetooth profile HFP (Hands-free
Profile) or HSP (Headset Profile), via Bluetooth connection.
If your smartphone or mobile phone supports both HFP and HSP, set it to HFP.
The operation may vary depending on the smartphone or mobile phone. Refer to the operating instructions supplied
with the smartphone or mobile phone.
Depending on the connected device or the application you are using, the functions may not work properly even if you
try to operate them with the touch sensors.
Connect the headset to a smartphone/mobile phone via Bluetooth connection.
1
Operate your smartphone or mobile phone to make a call.
When you make a call, the dial tone is heard from the headset.
If you make a call while you are listening to music, playback pauses.
You can talk using the microphones on the headset.
A: Microphones (left, right)
If no dial tone is heard via the headset
Use your smartphone or mobile phone to switch from the call device to the headset, or hold your finger to the
touch sensor on either the left or right headset unit for about 2 seconds.
2
Operate the smartphone or mobile phone to adjust the volume.
3
When you finish talking, tap the touch sensor on the left or right unit of the headset twice (with an interval
of about 0.3 seconds) to end the call.
If you made a call during music playback, music playback resumes automatically after ending the call.
4
To Next Page
Loading...
Need help?
General
Weight and Dimensions
