Help Guide
Wireless Noise Canceling Stereo Headset
WF-1000XM4
Controlling the audio device (Bluetooth connection)
If your Bluetooth device supports the device operating function (compatible protocol: AVRCP), then the following
operations are available. The available functions may vary depending on the Bluetooth device, so refer to the operating
instructions supplied with the device.
You can use the touch sensor on the right unit to perform the following operations.
Play/Pause: Tap the touch sensor.
Skip to the beginning of the next track: Tap the touch sensor twice quickly (with an interval of about 0.3 seconds).
Skip to the beginning of the previous track (or the current track during playback): Tap the touch sensor 3 times
quickly (with an interval of about 0.3 seconds).
When the volume adjustment function has been assigned to the touch sensor using the “Sony | Headphones Connect”
app, you can perform the following operations using the headset unit to which the function is assigned.
Increase the volume: Tap the touch sensor during music playback. The volume increases by 1 step.
Decrease the volume: Hold your finger to the touch sensor during music playback. The volume decreases
continuously. Release your finger from the touch sensor at the desired volume level.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
