Sony WH-1000XM3 User Manual

Help Guide
Wireless Noise Canceling Stereo Headset
WH-1000XM3
Initializing the headset to restore factory settings
Turn off the headset while the USB Type-C cable is disconnected and then press and hold the
button and the
NC/AMBIENT button simultaneously for 7 seconds or more.
The blue indicator flashes four times (
), and the headset is initialized. This operation resets volume settings,
etc., and deletes all pairing information. In this case, delete the pairing information for the headset from the device and
then pair them again.
If the headset does not operate correctly even after initializing, consult your nearest Sony dealer.
Note
Even if you initialize the headset, the updated software is retained.
Even if you initialize the headset after changing the language of voice guidance, the language will not be changed.
4-740-049-11(3) Copyright 2018 Sony Corporation
130

Sony WH-1000XM3 Specifications

General

Impedance	47 Ω
Driver type	Dynamic
Driver unit	39.8 mm
Magnet type	Neodymium
Ear coupling	Circumaural
Diaphragm material	Liquid Crystal Polymer (LCP)
Headphone frequency	4 - 40000 Hz
Headphone sensitivity	104.5 dB
Battery type	Built-in battery
Fast charging	Yes
Charging source	USB
Fast charging time	10 min
Battery recharge time	3 h
Continuous audio playback time	38 h
Cable type	OFC
2.5 mm connector	No
Cable length	1.2 m
Product color	Silver
Wearing style	Head-band
Volume control	Touch
Country of origin	Malaysia
Recommended usage	Calls/Music
Cables included	Audio (3.5mm), USB Type-C
Frequency band	2.4 GHz
Wireless range	10 m
Bluetooth version	4.2
Bluetooth profiles	A2DP, AVRCP, HFP, HSP
Connectivity technology	Wired & Wireless
Connector contacts plating	Gold
Microphone type	Built-in
Package type	Box
Package depth	77 mm
Package width	184.5 mm
Package height	252 mm
Package weight	1200 g

Weight and Dimensions

Depth	158 mm
Width	218 mm
Height	220 mm
Weight	254 g