Help Guide
Wireless Noise Canceling Stereo Headset
WH-1000XM3
Checking the remaining battery charge
You can check the remaining battery charge of the rechargeable battery.
When the
button is pressed while the headset power is on, the voice guidance indicating the remaining battery
charge can be heard.
“Battery about XX %” (The “XX” value indicates the approximate remaining charge.)
“Battery fully charged”
The remaining battery charge indicated by the voice guidance may differ from the actual remaining charge in some
cases. Please use it as a rough estimate.
In addition, the red indicator flashes (about 15 seconds) if the remaining battery charge is low when the headset is
turned on.
When the remaining charge is low
The currently operating indicator display changes to red. If you hear the voice guidance say, “Low battery, please
recharge headset”, charge the headset as soon as possible.
When the battery becomes completely empty, the headset sounds a warning beep, the voice guidance says, “Please
recharge headset. Power off”, and the headset automatically turns off.
When you are using an iPhone or iPod touch
When the headset is connected to an iPhone or iPod touch (iOS) that supports HFP (Hands-free Profile), it will show an
icon that indicates the remaining battery charge of the headset on the screen.
Usable devices
iPhone or iPod touch which supports HFP (Hands-free Profile)(iOS 5.0 or later)
iOS 10.2 or later
iOS 7.0 or later
iOS 5.X / 6.X
To Next Page
Loading...
Need help?
General
Weight and Dimensions
