Help Guide
Wireless Noise Canceling Stereo Headset
WH-1000XM3
Listening to ambient sound during music playback (Ambient Sound Mode)
You can hear ambient sound through the microphones embedded in the left/right units of the headset while enjoying
music.
To activate the Ambient Sound Mode
Press the NC/AMBIENT button while the noise canceling function is on.
To change the setting of the Ambient Sound Mode
You can set up the Ambient Sound Mode by connecting the smartphone (with the “Sony | Headphones Connect” app
installed) and the headset via the Bluetooth function.
Voice focus: While enjoying music, you can pick up the sounds (such as announcements on the train) that you want to
hear.
To deactivate the Ambient Sound Mode
Press the NC/AMBIENT button repeatedly until the Ambient Sound Mode is turned off.
Each time the button is pressed, the function switches as follows and is announced by the voice guidance.
The noise canceling function/Ambient Sound Mode: OFF
The noise canceling function: ON/Ambient Sound Mode: OFF
The Ambient Sound Mode: ON
Hint
Depending on the ambient condition and the type/volume of audio playback, the ambient sound may not be heard even when
using the Ambient Sound Mode. Do not use the headset in places where it would be dangerous if you are unable to hear ambient
sounds such as on a road with car and bicycle traffic.
If the headset is not worn properly, the Ambient Sound Mode may not work correctly. Wear the headset properly.
You can also change the settings of the noise canceling function and the Ambient Sound Mode with the "Sony | Headphones
Connect" app.
Ambient Sound Mode settings changed with the “Sony | Headphones Connect” app are stored in the headset. You can enjoy
music with the stored settings of the Ambient Sound Mode even when the headset is connected to other devices which do not
have the “Sony | Headphones Connect” app installed.
Note
To Next Page
Loading...
Need help?
General
Weight and Dimensions
