6. Close the both eject levers at a time, when the eject lever claws reach the A position (1). And push the eject levers
(2) until the unlock buttons pop out (3).
(1)(1)
(3)
(2)
(3)
(2)
Eject lever Eject lever
A
Unlock button
Rail of Extension board
Unlock button
Inspect or adjust board
A
Tip
When remove the inspect or adjust board, push the unlock buttons (1), open the eject levers (2),and then remove
the inspect or adjust board.
(1) (1)
(2)(2)
AA
Eject lever
Unlock button
Eject lever
Unlock button
Inspect or adjust board
XVS-8000-C/XVS-8000
1-13