UM2407 Rev 2 9/50
UM2407 Conventions
49
4 Conventions
Tabl e 3 provides the conventions used for the ON and OFF settings in the present
document.
In this document, for any information that is common to all sales types, the references are
noted “STM32H7 Nucleo-144 board” and “STM32H7 Nucleo-144 boards”.
Table 3. ON/OFF conventions
Convention Definition
Jumper JPx ON Jumper fitted
Jumper JPx OFF Jumper not fitted
Solder bridge SBx ON SBx connections closed by solder or 0-ohm resistor
Solder bridge SBx OFF SBx connections left open