Edition Manual Chapter Page
2014-03-31 Workshop Manual, GGP Park 3 Steering 5
3.2.2 Adjustment
1. Adjust the nuts under the articulating point
until the play disappear/comes up. Adjust
equal on the nuts under the articulating point.
Turn at the same time the steering wheel
right-left to apply the same tension/
slackening at the both chains.
2. Tighten the nuts 2,5 turns.
Warning!
Never tighten the both nuts more than
5 turns together, this will make the
springs to reach the bottom. Then, the
machine will be heavy to steer and the
steering will be unnecessary worn.
3. Test drive the machine straight on and check
that the steering wheel not is warped
4. If the steering wheel is warped, loosen first
one nut and tighten the other with the same
amount. Repeat the procedure until the
steering wheel is correct directed.1.Tension
the wire nuts equally on both sides so that
the wheel is straight when the machine is
straight.
Brace with a spanner so that the wire does
not twist.
To Next Page
Loading...
Need help?
General
