WORKSHOP MANUAL
T...102/122 - TC...102/122
Map of functional units
B) Rear
Place a suitable block (2) beneath the lower edge of
the plate.
In any case, an appropriately sized wedge (3) should
be placed behind the opposite wheels to stop the ma-
chine from accidentally moving backwards.
DANGER! The machine must never be lift-
ed using a hoist or other lifting equipment which
uses cables.
A) Front
Once the parking brake has been en ga ged, the ma-
chine can be lifted using a jack which pushes on the
underside of the frame, placing a wood block (1) be-
tween the base of the jack and the frame and check-
ing to see that the free movement of the front spring
equaliser has not been ob structed.
Validity
General informations
This chapter covers the main aspects of a servic
ing procedure and the general rules for guaran
teeing a successful service which respects the
safety of the machine.
Related topics
---
LIFTING
CHAPTER REVISION FROM ... PAGE
2.3 0 2018 1 of 1
To Next Page
Loading...
Need help?
General
