HT 105, HT 134, HT 135
English
37
Saw chain 3/8" P
Chain sprocket
Other Cutting Attachments
Other cutting attachments acc. to CS
Standard Z62.3 are available: see
section CSA-Standard Z62.3,
"Instruction leaflet" in the saw chain
package; or ask your STIHL dealer.
Your STIHL dealer will be happy to help
you properly match your engine with the
appropriate bar/chain combinations to
reduce the risk of kickback injury.
Users of this unit should carry out only
the maintenance operations described
in this manual. STIHL recommends that
other repair work be performed only by
authorized STIHL servicing dealers
using genuine STIHL replacement parts.
Genuine STIHL parts can be identified
by the STIHL part number, the
{ logo and, in some cases, by
the STIHL parts symbol K. The
symbol may appear alone on small
parts.
For repairs of any component of this
unit’s air emissions control system,
please refer to the air emissions
systems warranty in this manual.
Observe all country-specific waste
disposal rules and regulations.
STIHL products must not be thrown in
the garbage can. Take the product,
accessories and packaging to an
approved disposal site for environment-
friendly recycling.
Contact your STIHL servicing dealer for
the latest information on waste disposal.
Picco Micro Mini 3 (61 PMM3)
Type 3610
Pitch: 3/8" P (9.32 mm)
Drive link gauge: 1.1 mm
7-tooth for 3/8" P
Maintenance and Repairs Disposal
To Next Page
Loading...
Need help?
General
