BGE 61, BGE 71, BGE 81, SHE 71, SHE 81
English
31
Strain relief (cord retainer)
The strain relief protects the appliance
cord against damage.
N Insert the plug (1) into the extension
cord coupling (2).
N Make a loop in the extension cord.
N Pass the loop (3) through the
opening (4).
N Slip the loop over the hook (5) and
pull it tight.
Connecting to Wall Outlet
Make sure your machine is switched off
before you connect it to the power
supply – see "Switching Off".
N Connect the extension cord plug to
a properly installed wall outlet.
N Make sure you have a secure and
balanced footing.
N Hold the unit in the normal working
position.
BGE 61, BGE 71, SHE 71
N Move switch (1) to I or II (position II
depends on model).
Units with single switch setting (I):
I = full power
Units with two switch settings (I and II):
I = half power
II = full power
BGE 81, SHE 81
N Squeeze trigger switch (2) on
control handle.
Blowing and suction power are infinitely
variable.
Press in the lock button (3) to lock the
trigger switch (2) in the maximum power
position in the blower and vacuum
modes.
Switching On