User Manual 2 Safety Instructions
5
Death or burning hazard by touching the internal terminals of the device!
Do not touch the terminals or conductors in contact to the inverter or PV
string.
Observe all the instructions and safety regulations related to PVS
connection.
High voltage is present inside the device!
Follow all the warning signs in the device.
Respect all the safety instructions in this manual and other document.
The ground cable must be grounded properly, otherwise,
lethal electric shock happens to the operator or installer once a fault
occurs.
device may be damaged after lightening stroke.
Incorrect cable connection may cause damages to the PV cells, the PVS and
inverter. Respect the following instructions during cable connection:
Connect by strictly following the circuit diagram;
Measure and make sure the string open-circuit voltage meets the
requirements of the PVS before inserting the fuse;
Identify the positive pole and negative pole before connection.
To Next Page
Loading...
Need help?
General
