4
2 Safety Instructions
This chapter describes some important safety instructions about PVS.
Please read the manual carefully before installation. If any device damage
occurs when ignoring the safety instructions, our company has the right to
exclude all warranty claims.
Death resulting from burning and electric shock upon touching the live
components of the PVS.
Disconnect the end connection of the PV string before cable connection;
Do not use ordinary ammeter to measure the DC voltage before cable
connection. An ammeter with withstanding voltage of 1500V is
recommended. Serious consequences may follow if otherwise.
Observe all safety instructions required by the PV cell manufacturer.
Device damage or system fault may cause fire and electric shock!
Optical check the device for any possible damages or dangerous states
before operation.
Check if other external devices or circuit connection are in safe state.
Work on the device only when it is safe to do so.
To Next Page
Loading...
Need help?
General
