28
MOTOR COVER FASTENING
ADJUSTMENT
If you feel motor cover fastening is loose or too
tight when locking the levers, adjust as follows:
1. Loosen the bolts 1.
2. Adjust the position of brackets 2. To
increase the fastening, move the brackets to
the direction A. To decrease the fastening,
move the brackets to the direction B.
3. Tighten the bolts.
Motor cover
METER (OPTION)
MULTI-FUNCTION GAUGE
This gauge is multifunctional gauge that dis-
plays the various information through digital
communication with the engine.
Information displayed are engine speed, shift
position, fuel level, fuel consumption, etc.
NOTE:
There is information that cannot be displayed
depending on the model and equipment.
NOTE:
Consult your authorized Suzuki marine dealer
for setting up the multi-function gauge.
NOTE:
For details the proper handling of the multi-
function gauge, refer to “OPERATION
INSTRUCTION MANUAL” packed in the gauge.
NOTE:
The navigation data on this gauge should be
used only for your reference. When exact navi-
gation information is required, use nautical
charts and/or accurate navigation instruments
together with the multi-function gauge.
To Next Page
Loading...
Need help?
General
